XL Clear #96 1K UV Resistant Clear Coat

Ready to Use EXCEL CLEAR #96 X-L 96 IS NOW MIR COMPLIANT

Description X-L 96 is a 1K, ready to use clear coat in an aerosol. It is used for finishing coated surfaces in order to achieve a high gloss, UV resistant, durable finish. A new high performance clear coat that gives 2K performance with the convenience of an aerosol. X-L 96 is the ultimate repair tool. It is crystal clear, has excellent build and is compatible with water-based base coats. The cured X-L 96 has excellent gloss and image depth it is ideal for spot repairs and gives a durable, UV resistant finish. X-L 96 is isocyanate free.

Health & Safety Statement FOR PROFESSIONAL USE ONLY. Read full instructions before use.

IMPORTANT: This product contains hazardous materials and therefore appropriate personal protective equipment should always be used. Please refer to the label and consult the material safety data sheet for full handling instructions and personal protection information. These are available via your local stockist or via the Excel Products Website www.excelproducts.net. Excel Products disclaim any liability where the user does not wear the recommended personal protective equipment. Surface preparation and instructions for use X-L 96 can be applied using the preparation procedure shown below: Thoroughly clean and degrease surfaces with a suitable spirit wipe or thinner such as Excel Products Wax & Grease Remover. Abrade solid colored coatings wet or dry with 800-1000 abrasive, re-clean, dry and degrease. If coating solvent-based basecoats apply X-L 96 within a period 20 minutes after application of the base coat. Application Shake can thoroughly before use for a minimum of 2 minutes. Apply 1-2 light even coats. Allow 5-10 minutes flash off time between coats. Drying time Allow 30 minutes before handling. Drying time is dependent upon film thickness, humidity and temperature.

VOC Information MIR Ref. CC:MIR1.5

Product code X-L 96 - 450ml aeroso