Iwata Hi-Line Airbrush Parts

Iwata Head O-Ring for Eclipse airbrush.

0.3mm Fluid Needle for Iwata HP, HP+ and Hi-Line airbrushes. Iwata Part#I0753

I 7251 - Iwata Needle Packing Screw with PTFE Packing

I0808 - 0.3mm Fluid Nozzle for Iwata HP-C+ and HP-BC+

Needle Guide w/Aux Lever

0.2mm Fluid Needle for Iwata HP, HP+ and Hi-Line airbrushes. Part #I-0751.

Valve Piston for Iwata High Performance, High Performance Plus and Hi-Line Series airbrushes. Item #I1751.

0.2mm Fluid Nozzle for Iwata HP+ and Hi-Line airbrushes. Part #I0807.

FOR USE WITH: Custom Micron V2 (Square Trigger):CM-B/SB/C/CP/Takumi Hi-Line:HP-AH/BH/CH/TH High Performance Plus:HP-AP/BP/SBP/CP/BCP Ecli...

Iwata Packing Air Piston (O-Ring) for High Performance and High Performance Plus Series airbrushes. As well as Iwata Revolution M Series airbrushes.

FOR USE WITH: Hi-Line:HP-AH/BH High Performance Plus:HP-AP/BP/SBP Eclipse:HP-BCS

0.3mm Nozzle Cap for Iwata HP, HP+ and Hi-Line airbrushes. Part #I1403.

0.3mm Needle Cap for Iwata HP, HP+ and Hi-Line airbrushes. Part #I1102.

FOR USE WITH: Hi-Line:HP-AH/BH/CH High Performance Plus:HP-CP/BCP

I 1257 - Needle Packing Screw with Solvent-Proof Packing for .2mm sized Iwata HP+ and Hi-Line airbrushes.

Iwata Air Valve Set for HP-C+ and HP-BC+. Part #I0304.

Iwata Needle Chucking Guide Part #I1157.

An airbrush is only a true Iwata when it contains genuine Iwata parts. To keep your airbrush operating at peak performance, make sure the model num...

FOR USE WITH: Hi-Line:HP-AH/BH/CH High Performance Plus:HP-CP/BCP Revolution:HP-AR/BCR/BR/CR/CR3

FOR USE WITH: Custom Micron V2 (Square Trigger):CM-B/SB/C/CP Hi-Line:HP-AH/BH/CH/TH High Performance Plus:HP-AP/BP/SBP/CP/BCP Revolution:HP-TR1/TR2

Main Lever for Iwata HP-A+, HP-B+, HP-SB+, HP-A, HP-B, HP-SB and airbrushes. Part #I1001.

I1407 - 0.2mm Nozzle Cap for Iwata Hi-Line HP-AH and HP-BH.

I 030 1 AIR VALVE SET for Iwata HP-A+, HP-B+ and HP-SB+

FOR USE WITH: Hi-Line:HP-AH/BH/CH High Performance Plus:HP-AP/BP/SBP/CP/BCP Revolution:HP-SAR/AR/BCR/BR/CR/CR3

An airbrush is only a true Iwata when it contains genuine Iwata parts. To keep your airbrush operating at peak performance, make sure the model num...

Pre Set Handle for Iwata Part # I 155 2. Does not fit all Iwata airbrushes. Please refer to your parts list.

I1401 - 0.2mm Nozzle Cap for Iwata HP-BH, HP-A, HP-B and HP-SB.

I 100 2 MAIN LEVER for Iwata HP-A+, HP-B+ and HP-SB+.

0.2mm Needle Cap for Iwata HP, HP+ and Hi-Line airbrushes. Part #I1101.